| |
|
|
|
|
|
|
| |
Log Set Step 1
1. Take the selected log set, preferably dry.
|
|
Log Set Step 2
2. Using a dry brush technique; apply sparingly the UCL Lowlight Gel Stain.
|
|
Log Set Step 3 and 4
3. No more than shown is required to maintain maximum effect.
|
|
| |
|
|
|
|
|
|
| |
Log Set Step 4
4. Carefully paint, ideally with a one inch brush, the split areas using the UCL Split Colour Stain.
Split Colour Stain
|
|
Log Set Step 5
5. Ensure that no white is showing through and the coating is even.
|
|
Log Set Step 6
6. This piece is now ready for dipping, No need for drying.
|
|
| |
|
|
|
|
|
|
| |
Log Set Step 7
7. Dip the whole article into the UCL Superwash Stain.
|
|
Log Set Step 8
8. Now it’s come to life and looking more realistic.
|
|
Log Set Step 9
9. Notice how the UCL Split Colour Stain has not run and has created an aged effect.
|
|
| |
|
|
|
|
|
|
| |
Log Set Step 10
10. The UCL Lowlight Gel Stain has been specially formulated to part resist the UCL Superwash Stain this gives the article depth and contrast. Requires drying at 180o Celsius. (Optimum).
|
|
Log Set Step 11
11. Using a fine nozzle spray gun, spray the char areas with the UCL Spray Stain.
|
|
Log Set Step 12
12. Take care not to over spray onto the split areas.
|
|
| |
|
|
|
|
|
|
| |
Log Set Step 13
13. Using a dry brush technique; apply sparingly the UCL Highlight Gel Stain.
|
|
Log Set Step 14
14. Nearly finished and looking good.
|
|
Log Set Step 15
15. Using a heavy dry brush technique; apply sparingly the UCL Ash Grey Gel Stain.
|
|
| |
|
|
|
|
|
|
| |
Log Set Step 16
16. There we have it, a fully decorated log set using only a six colour system.
|
|
|
|
|
|
